EP saw dust powder machine of EP factory

The EP saw dust powder machine is well designed. The structure of a briquette machine is simple and reasonable. And it is easy to operate the briquette machine. What’s more, the rate of finished products of our briquette machines is pretty high. That means our machines are high-efficiency equipment.

Biomass briquette machines are suitable to process a lot of different raw materials. It is not true that briquette machines can deal with all kinds of materials. If you want to use EP saw dust powder machine of EP factory to make charcoal sticks, you should make sure that the moisture content of the raw material is among 5%-12%. If it is too wet, then you can dry it with a drying machine. In addition, the more lignin the raw material contains, the higher the carbon content of the finished charcoal sticks will be.

EP saw dust powder machine of EP factory employ the working principle of extruding materials under high pressure and high temperature. The components of EP biomass briquetting equipment are made of high-quality material.

This equipment is designed reasonably. What’s more, they are high-quality  saw dust powder machine with a simple structure. In addition, biomass briquette machines are small in size, so the space demand of the machine is small. Moreover, the equipment is energy-saving and labor-saving.

The scientific structure of the EP saw dust powder machine of EP factory makes it possible to operate the machine easily. And you can use the machine to make high-density briquettes. For your reference, the ratio of briquetting of the forming machine is above 96%.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, EPsaw dust powder machineof EP factory will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The solid fuel(charcoal briquette) that is made by EPsaw dust powder machineof EP factory is of high calorific value. And it is easy to light the charcoal briquettes. Compared with ordinary timber, charcoal fuel’s combustion period is longer, and much less pollutants are generated during burning. All in all, the use of charcoal sticks can partly solve the problem of energy shortage.

The ash of burning biomass briquettes is a kind of high-quality organic potash fertilizer. As a new-type fuel, biomass briquettes are widely acceptable by people. Compared with traditional fuels, biomass briquettes that are made by EP saw dust powder machine are more eco-friendly.

The salesmen of EP Machinery are all very experienced. They can give your best advice and customize best equipment for you according to your requirements. In addition, EPsaw dust powder machine you purchase will be checked thoroughly before delivery.

The EP saw dust powder machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.