ISO Quality bio coal briquetting machine of Anyang

In the industry of manufacturing charcoal from biomass wastes, ISO Quality bio coal briquetting machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

There are various materials that can be used to make biomass briquettes through  bio coal briquetting machine of Anyang. For instance, you can make use of crop stalks, wood surplus material of forestry, organic wastes of food processing industry to produce biomass briquettes that can be used as fuel.

ISO Qualitybio coal briquetting machine have used the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.

The core part of the ISO Quality bio coal briquetting machine is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

ISO Quality bio coal briquetting machine employs a steep-lead feeding propeller, so the feeding speed is fast. What’s more, the extruding propeller inside the machine has a small lead, which will save energy.

A charcoal briquette production line basically consists of a crushing machine, a dryer, a ISO Qualitybio coal briquetting machine and a carbonation furnace. These machines are placed in order to make high-quality charcoal briquettes. What’s more, you can also equip an packing machine behind the carbonation furnace.

In industrial engineering, charcoal briquettes that are made by ISO Qualitybio coal briquetting machineof Anyang can take place of coal and heavy oil to be fuel for heating steam boilers. In addition, the charcoal briquette can also be used as material to make activated carbon, silicon carbide and so on. Therefore, charcoal briquettes are necessary material in mosquito-repellent incense plants, explosive factories and casting factories.

Biomass charcoal briquettes made by bio coal briquetting machine are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

Every time you turn on the switch of a bio coal briquetting machine of Anyang, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

It is common that pilot run should be done before the bio coal briquetting machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.