Practical briquetting plant machine in South Africa - All Article - Zhengzhou E.P Machinery Co., Ltd. - Biomass Briquette Machine,Wood Pellet Machine

Summary ：In the industry of manufacturing charcoal from biomass wastes, Practical briquetting plant machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

The Practical briquetting plant machine is used in charcoal production lines. In general, the whole production line consists of a crusher machine, a drying machine, a briquette machine, a carbonation furnace and some auxiliary equipment. The finished charcoal products are of high density and good flammability.

Practical briquetting plant machine in South Africa

Practical briquetting plant machine of EP Machinery company are high-efficiency and high-quality equipment. Our briquetting equipment can process materials including rice hull, hay, shrubs branches, wood refuse, bamboo refuse and bamboo dust, sugarcane bagasse and so on.

The briquetting plant machinein South Africa can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

The structure of Practicalbriquetting plant machine is compact. The finished briquettes can be used as fuel directly, or you can put them into a carbonation furnace for deep processing. Our machines can produce high-density briquettes which are solid fuel with high calorific value.

The briquetting speed of Practical briquetting plant machine is fast. It can make briquette of 180 centimeters per minute. The service life of the equipment is 10 times longer than common machines in the market.

Biomass raw material such as wood branches, bamboo dust and crop stalks need to go through four steps to be finished charcoal products. The four processing steps are crushing process, drying process, briquetting process(Practicalbriquetting plant machine and carbonizing process.

The charcoal briquettes that are produced by Practical briquetting plant machine in South Africa are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass fuel’s development can restrain the price of crude oil in the international market. Biomass charcoal briquettes made by briquetting plant machine in South Africa can take place of the traditional fossil energy such as coal and oil. Thus, the country’s import volume of oil will decrease. And the amount of carbon dioxide emitted in air by human activity will be reduced.

The salesmen of EP Machinery are all very experienced. They can give your best advice and customize best equipment for you according to your requirements. In addition, Practical briquetting plant machine you purchase will be checked thoroughly before delivery.

It is common that pilot run should be done before the briquetting plant machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.