The commercial sawdust briquette making machine is well designed. The structure of a briquette machine is simple and reasonable. And it is easy to operate the briquette machine. What’s more, the rate of finished products of our briquette machines is pretty high. That means our machines are high-efficiency equipment.
Biomass briquette machines are suitable to process a lot of different raw materials. It is not true that briquette machines can deal with all kinds of materials. If you want to use commercialsawdust briquette making machineof trustworthy supplier to make charcoal sticks, you should make sure that the moisture content of the raw material is among 5%-12%. If it is too wet, then you can dry it with a drying machine. In addition, the more lignin the raw material contains, the higher the carbon content of the finished charcoal sticks will be.
Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. commercialsawdust briquette making machineof trustworthy supplier are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.
The machines’ stability and durability is pretty high. It is very important to lubricate the equipment regularly. As long as there is no lack of oil in the joints of the machine, the sawdust briquette making machine can be used for many years.
commercialsawdust briquette making machineof trustworthy supplier adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.
At the beginning, the raw materials will be crushed into small pieces. If the moisture content of the raw materials is high, then they need to be dried. After the drying process, it comes to the core procedure of the production line: briquetting. After the raw materials are made into briquettes by commercialsawdust briquette making machineof trustworthy supplier, you can choose to put them into a carbonation furnace to make charcoal briquettes or pack them directly. In general, many people choose to conduct the carbonizing process because charcoal briquettes value more than “raw briquettes” that don’t go through the carbonizing process.
In industrial engineering, charcoal briquettes that are made by commercial sawdust briquette making machine of trustworthy supplier can take place of coal and heavy oil to be fuel for heating steam boilers. In addition, the charcoal briquette can also be used as material to make activated carbon, silicon carbide and so on. Therefore, charcoal briquettes are necessary material in mosquito-repellent incense plants, explosive factories and casting factories.
Biomass briquettes produced by commercial sawdust briquette making machine don’t contain any phosphorus. Therefore, when the briquettes are burning, no sulfur dioxide and phosphorus pentoxide will be generated. As a result, no acid rain will be formed. We can say using biomass briquettes as fuel is a way to protect the environment.
There is a regulation for using a commercialsawdust briquette making machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.
The commercialsawdust briquette making machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.