efficient sawdust briquetting pressing machine provided by factory

efficient sawdust briquetting pressing machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

sawdust briquetting pressing machineprovided by factory takes forestry wastes and crop wastes as material to make briquettes. The forestry wastes and crop wastes include saw dust, corn stalks, beanstalks, sorghum stalks, cotton stalks, peanut vines, sunflower stalks and so on. EP briquette machines can turn biomass wastes into treasure.

The sawdust briquetting pressing machine provided by factory can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

efficientsawdust briquetting pressing machine can be customized according to your requirements. For example, we can customize different molds according to the raw materials. Apart from this point, we can also customize the machines of different production yield.

The scientific structure of the efficientsawdust briquetting pressing machineprovided by factory makes it possible to operate the machine easily. And you can use the machine to make high-density briquettes. For your reference, the ratio of briquetting of the forming machine is above 96%.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And sawdust briquetting pressing machineprovided by factory and drying machines are important equipment.

The charcoal briquettes that are produced by efficientsawdust briquetting pressing machineprovided by factory are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass energy has good ecological and social benefits. First of all, using biomass briquettes which are made by efficient sawdust briquetting pressing machine as fuel will protect the environment. Secondly, it will promote continuous development in agriculture.

The salesmen of EP Machinery are all very experienced. They can give your best advice and customize best equipment for you according to your requirements. In addition, efficientsawdust briquetting pressing machine you purchase will be checked thoroughly before delivery.

The efficient sawdust briquetting pressing machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.