commercial sawdust charcoal machine in Vietnam

commercial sawdust charcoal machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

Biomass briquette machines are suitable to process a lot of different raw materials. It is not true that briquette machines can deal with all kinds of materials. If you want to use commercialsawdust charcoal machinein Vietnam to make charcoal sticks, you should make sure that the moisture content of the raw material is among 5%-12%. If it is too wet, then you can dry it with a drying machine. In addition, the more lignin the raw material contains, the higher the carbon content of the finished charcoal sticks will be.

commercial sawdust charcoal machine can compress powdery materials which contain lignin into briquettes. The molds for making briquettes can be customized. You can use this equipment to make briquettes of three different diameters: 45mm, 50mm, 55mm.

commercialsawdust charcoal machine can be customized according to your requirements. For example, we can customize different molds according to the raw materials. Apart from this point, we can also customize the machines of different production yield.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so commercialsawdust charcoal machine runs steadily  and will not make too much noise when working.

This is the simple instruction of the working procedure of charcoal briquette making lines. First of all, the crushing machine will crush the raw material. Then, the drying machine will dry the wet material to some degree. Next, the dried material will be compressed and formed in the sawdust charcoal machinein Vietnam. The last step is to carbonize the formed briquettes with carbonation furnaces.

Charcoal briquettes are not only high-quality fuel for domestic cookers, heating stoves and industrial boilers, but also they can be used as clean fuel for power plants. If we can make good use of charcoal briquettes with commercialsawdust charcoal machinein Vietnam, it will make it possible to realize the sustainable development of energy. In addition, using charcoal briquette as fuel will help a lot to deal with the problems caused by environmental pollution.

Researching and developing biomass energy has become a hot topic in the world. The biomass charcoal briquette is one of the research achievements. Make use of biomass briquettes as fuel is cleaner than to use fossil fuels such as oil and coal. commercialsawdust charcoal machinein Vietnam is an important equipment in this industry

There will be some unforeseen circumstances while using the commercial sawdust charcoal machine. For example, if material clogs in the feeding port, at this time, you can use a batten or a bamboo cane to solve the problem. Notice: you mustn’t use metal bars which will damage the machine.

The commercialsawdust charcoal machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.