High Yield wood briquette extruding machine Made in China

In the industry of manufacturing charcoal from biomass wastes, High Yield wood briquette extruding machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the  High Yield wood briquette extruding machine.

High Yieldwood briquette extruding machine can compress powdery materials which contain lignin into briquettes. The molds for making briquettes can be customized. You can use this equipment to make briquettes of three different diameters: 45mm, 50mm, 55mm.

High Yieldwood briquette extruding machine can be customized according to your requirements. For example, we can customize different molds according to the raw materials. Apart from this point, we can also customize the machines of different production yield.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so High Yield wood briquette extruding machine  runs steadily  and will not make too much noise when working.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And wood briquette extruding machine Made in China and drying machines are important equipment.

The usage amount of charcoal briquettes made by High Yield wood briquette extruding machine Made in China  is on the rise gradually. Charcoal sticks are increasingly used in our daily life and industrial production. On the one hand, charcoal sticks can be used in our favorite barbecues. Because charcoal rods are smokeless and odourless, they have become more and more favorable; On the other hand, charcoal briquetting sticks are ideal material for warming in winter.

Researching and developing biomass energy has become a hot topic in the world. The biomass charcoal briquette is one of the research achievements. Make use of biomass briquettes as fuel is cleaner than to use fossil fuels such as oil and coal. High Yieldwood briquette extruding machineMade in China is an important equipment in this industry

EP Machinery Company has 9 years’ experience in manufacturing wood briquette extruding machine. Over the past years, we have helped many customers start their business in this industry. Importantly, we can provide you with high-quality machines and first-class service.

The High Yield wood briquette extruding machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.