Professional wood briquette machine of Anyang

In the industry of manufacturing charcoal from biomass wastes, professional wood briquette machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

Wood dust, crop stalks, peanut shells, branches and rice husk are common materials for professionalwood briquette machine. These materials will be made into briquettes. Next, the processed briquettes will be carbonized in a furnace. After this step, charcoal briquettes will finally be made.

The wood briquette machine of Anyang can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

Nowadays, people have attached importance to environment protection. Therefore, the future of eco-friendly equipment is promising. wood briquette machine of Anyang are such equipment and used to process some forestry and crop wastes. The other advantage is the investment of the equipment is small while the return profit of it is high.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Professionalwood briquette machine runs steadily  and will not make too much noise when working.

A charcoal briquette production line basically consists of a crushing machine, a dryer, a Professionalwood briquette machine and a carbonation furnace. These machines are placed in order to make high-quality charcoal briquettes. What’s more, you can also equip an packing machine behind the carbonation furnace.

The usage amount of charcoal briquettes made by professional wood briquette machine of Anyang  is on the rise gradually. Charcoal sticks are increasingly used in our daily life and industrial production. On the one hand, charcoal sticks can be used in our favorite barbecues. Because charcoal rods are smokeless and odourless, they have become more and more favorable; On the other hand, charcoal briquetting sticks are ideal material for warming in winter.

Biomass charcoal briquettes made by wood briquette machine are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

There is a regulation for using a professional wood briquette machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

It is common that pilot run should be done before the wood briquette machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.