Labor-saving wood log charcoal making machine with best price

Labor-saving wood log charcoal making machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

wood log charcoal making machine with best price takes forestry wastes and crop wastes as material to make briquettes. The forestry wastes and crop wastes include saw dust, corn stalks, beanstalks, sorghum stalks, cotton stalks, peanut vines, sunflower stalks and so on. EP briquette machines can turn biomass wastes into treasure.

The wood log charcoal making machinewith best price can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

Each Labor-saving wood log charcoal making machine with best price is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

Labor-savingwood log charcoal making machinewith best price adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

Biomass raw material such as wood branches, bamboo dust and crop stalks need to go through four steps to be finished charcoal products. The four processing steps are crushing process, drying process, briquetting process(Labor-savingwood log charcoal making machine and carbonizing process.

Charcoal briquettes are renewable fuel which is made from biomass wastes by Labor-saving wood log charcoal making machine with best price. The calorific value of charcoal briquette is higher than common charcoal and coal. Moreover, the briquette is smokeless and odourless when it is burning. Apart from that, there is no poison generated during its burning. It can be applied for home heating and barbecuing.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by Labor-saving wood log charcoal making machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

Every time you turn on the switch of a wood log charcoal making machinewith best price, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

The Labor-savingwood log charcoal making machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.