Hot Sale biomass wood briquette machine in Arabia

Hot Sale biomass wood briquette machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the  Hot Sale biomass wood briquette machine.

The structure of Hot Salebiomass wood briquette machine is simple. This equipment consists of five parts: frame part, driving part, feeding port, pressing part and conveying part. Our briquette machines are easy to be operated and maintained.

It is widely acknowledged in the market that Hot Salebiomass wood briquette machine are  durable equipment. Here is the reason why our machines are long-lasting products. The main parts of the machines are made from special wear-resistant material.

Hot Salebiomass wood briquette machinein Arabia’s pinch roller has a function of automatic regulating. This function will adopt bi-rolling principle of the thrust bearings to automatically adjust pressure, so that the material in the machine will not agglomerate. All in all, the function will guarantee the forming effect.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And biomass wood briquette machine in Arabia and drying machines are important equipment.

Charcoal rods which are produced by Hot Salebiomass wood briquette machinein Arabia can be used in steel mills in order to make high-quality steel. In a word, charcoal briquettes are widely used in different industries, and the market demand of it also becomes large. As a result, biomass briquette machines are widely praised.in the international market. The usage of biomass briquette machines has greatly reduced the cost of making people's charcoal sticks, while profit multiples at the same time.

Biomass charcoal briquettes made by biomass wood briquette machine are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

biomass wood briquette machine in Arabia can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

The Hot Salebiomass wood briquette machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.