New Design briquette press machine for straw in Turkey

To some degree, New Design briquette press machine for straw are eco-friendly equipment, so the investment prospect of this kind of machine is promising. Currently, biomass briquetting equipment is widely used in the fields of industrial engineering, agricultural industry, stock farming, chemical industry, metallurgy, heating and so on.

Biomass briquette machines are suitable to process a lot of different raw materials. It is not true that briquette machines can deal with all kinds of materials. If you want to use New Design briquette press machine for straw in Turkey to make charcoal sticks, you should make sure that the moisture content of the raw material is among 5%-12%. If it is too wet, then you can dry it with a drying machine. In addition, the more lignin the raw material contains, the higher the carbon content of the finished charcoal sticks will be.

The working principle of briquette press machine for straw in Turkey is to make powdery ligneous materials into rod-shaped solid fuel under the condition of high pressure and temperature. And the inside temperature of the machine is adjustable.

The core part of the New Designbriquette press machine for straw is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

New Design briquette press machine for straw in Turkey are highly automatic equipment. This kind of equipment has many different advantages such as large output, reasonable price,  low power consumption and easy operation. What’s more, it is convenient to move the machine from one place to another place. In addition, if there is no electric power facilities available, the briquette machines can be powered by diesel engines.

At the beginning, the raw materials will be crushed into small pieces. If the moisture content of the raw materials is high, then they need to be dried. After the drying process, it comes to the core procedure of the production line: briquetting. After the raw materials are made into briquettes by New Design briquette press machine for straw in Turkey, you can choose to put them into a carbonation furnace to make charcoal briquettes or pack them directly. In general, many people choose to conduct the carbonizing process because charcoal briquettes value more than “raw briquettes” that don’t go through the carbonizing process.

The charcoal briquettes that are produced by New Designbriquette press machine for strawin Turkey are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass briquettes produced by New Design briquette press machine for straw don’t contain any phosphorus. Therefore, when the briquettes are burning, no sulfur dioxide  and phosphorus pentoxide will be generated. As a result, no acid rain will be formed. We can say using biomass briquettes as fuel is a way to protect the environment.

Every time you turn on the switch of a briquette press machine for straw in Turkey, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

The New Design briquette press machine for straw should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.