highly efficient charcoal making machine for waste recycling

The highly efficient charcoal making machine is well designed. The structure of a briquette machine is simple and reasonable. And it is easy to operate the briquette machine. What’s more, the rate of finished products of our briquette machines is pretty high. That means our machines are high-efficiency equipment.

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the highly efficientcharcoal making machine.

The structure of highly efficient charcoal making machine is simple. This equipment consists of five parts: frame part, driving part, feeding port, pressing part and conveying part. Our briquette machines are easy to be operated and maintained.

Nowadays, people have attached importance to environment protection. Therefore, the future of eco-friendly equipment is promising. charcoal making machinefor waste recycling are such equipment and used to process some forestry and crop wastes. The other advantage is the investment of the equipment is small while the return profit of it is high.

highly efficientcharcoal making machine employs a steep-lead feeding propeller, so the feeding speed is fast. What’s more, the extruding propeller inside the machine has a small lead, which will save energy.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And charcoal making machinefor waste recycling and drying machines are important equipment.

The charcoal sticks made by highly efficientcharcoal making machinefor waste recycling are widely used. For instance, charcoal briquettes can be used for heating in winter in the northern area. What’s more, you can use them to warm greenhouses when it is cold. In addition, you can also use those briquettes as fuel to cook.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by highly efficientcharcoal making machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

There will be some unforeseen circumstances while using the highly efficientcharcoal making machine. For example, if material clogs in the feeding port, at this time, you can use a batten or a bamboo cane to solve the problem. Notice: you mustn’t use metal bars which will damage the machine.

It is common that pilot run should be done before the charcoal making machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.