Inexpensive saw dust pressing machine with Factory Price

In the industry of manufacturing charcoal from biomass wastes, Inexpensive saw dust pressing machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

Wood dust, crop stalks, peanut shells, branches and rice husk are common materials for Inexpensivesaw dust pressing machine. These materials will be made into briquettes. Next, the processed briquettes will be carbonized in a furnace. After this step, charcoal briquettes will finally be made.

Inexpensive saw dust pressing machine can compress powdery materials which contain lignin into briquettes. The molds for making briquettes can be customized. You can use this equipment to make briquettes of three different diameters: 45mm, 50mm, 55mm.

The structure of Inexpensive saw dust pressing machine is compact. The finished briquettes can be used as fuel directly, or you can put them into a carbonation furnace for deep processing. Our machines can produce high-density briquettes which are solid fuel with high calorific value.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Inexpensive saw dust pressing machine  runs steadily  and will not make too much noise when working.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And saw dust pressing machine with Factory Price and drying machines are important equipment.

Charcoal rods which are produced by Inexpensivesaw dust pressing machinewith Factory Price can be used in steel mills in order to make high-quality steel. In a word, charcoal briquettes are widely used in different industries, and the market demand of it also becomes large. As a result, biomass briquette machines are widely praised.in the international market. The usage of biomass briquette machines has greatly reduced the cost of making people's charcoal sticks, while profit multiples at the same time.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by Inexpensive saw dust pressing machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

The main business item of our company is to produce Inexpensive saw dust pressing machine with Factory Price and charcoal briquette production lines. Our briquette machines are eco-friendly equipment and this kind of briquetting machine is one of the best-selling machines on the international market.

There are something you should know about installing a saw dust pressing machine with Factory Price. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.