Inexpensive sawdust briquette press machine in China

Inexpensive sawdust briquette press machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

The main function of Inexpensive sawdust briquette press machine in China is to make flammable briquettes from forestry wastes and crop wastes such as all kinds of stalks and wood dust through the technique of hot briquetting.

It is easy to understand the working principle of Inexpensive sawdust briquette press machine in China. Simply speaking, putting the powdery materials in the feeding port. Then the materials will be pressed and formed in the briquetting machine. After that, finished briquettes will come out from the discharging port.

Nowadays, people have attached importance to environment protection. Therefore, the future of eco-friendly equipment is promising. sawdust briquette press machinein China are such equipment and used to process some forestry and crop wastes. The other advantage is the investment of the equipment is small while the return profit of it is high.

Inexpensive sawdust briquette press machine in China are highly automatic equipment. This kind of equipment has many different advantages such as large output, reasonable price,  low power consumption and easy operation. What’s more, it is convenient to move the machine from one place to another place. In addition, if there is no electric power facilities available, the briquette machines can be powered by diesel engines.

In general, to make charcoal briquettes, crushing process, drying process, briquetting process and carbonizing process will be conducted orderly. Crushing machines are used to crush some material that are large and can not be formed by the Inexpensivesawdust briquette press machine directly. There are different types of crusher machines of our company. You can choose the suitable one according to the raw material that you plan to use.

Charcoal rods which are produced by Inexpensive sawdust briquette press machine in China can be used in steel mills in order to make high-quality steel. In a word, charcoal briquettes are widely used in different industries, and the market demand of it also becomes large. As a result, biomass briquette machines are widely praised.in the international market. The usage of biomass briquette machines has greatly reduced the cost of making people's charcoal sticks, while profit multiples at the same time.

Biomass charcoal briquettes are products that are made of agricultural and forestry organic wastes. It is the kind of recycling energy and it is eco-friendly to use biomass briquettes made by Inexpensive sawdust briquette press machine in China as fuel.

There is a regulation for using a Inexpensive sawdust briquette press machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

It is common that pilot run should be done before the sawdust briquette press machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.