search

well-designed sawdust charcoal machine in Turkey

2019-11-16 04:11:00
czqwjb009
Original
520
Summary :Our biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life. In addition, well-designed sawdust charcoal machine are labor-saving equipment. In this way, the cost of investment will be less.

well-designed sawdust charcoal machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

sawdust charcoal machinein Turkey takes forestry wastes and crop wastes as material to make briquettes. The forestry wastes and crop wastes include saw dust, corn stalks, beanstalks, sorghum stalks, cotton stalks, peanut vines, sunflower stalks and so on. EP briquette machines can turn biomass wastes into treasure.

well-designedsawdust charcoal machine can compress powdery materials which contain lignin into briquettes. The molds for making briquettes can be customized. You can use this equipment to make briquettes of three different diameters: 45mm, 50mm, 55mm.

well-designed sawdust charcoal machine can be customized according to your requirements. For example, we can customize different molds according to the raw materials. Apart from this point, we can also customize the machines of different production yield.

The scientific structure of the well-designedsawdust charcoal machinein Turkey makes it possible to operate the machine easily. And you can use the machine to make high-density briquettes. For your reference, the ratio of briquetting of the forming machine is above 96%.

In general, to make charcoal briquettes, crushing process, drying process, briquetting process and carbonizing process will be conducted orderly. Crushing machines are used to crush some material that are large and can not be formed by the well-designedsawdust charcoal machine directly. There are different types of crusher machines of our company. You can choose the suitable one according to the raw material that you plan to use.

well-designed sawdust charcoal machine in Turkey

The charcoal sticks made by well-designed sawdust charcoal machine in Turkey are widely used. For instance, charcoal briquettes can be used for heating in winter in the northern area. What’s more, you can use them to warm greenhouses when it is cold. In addition, you can also use those briquettes as fuel to cook.

Biomass charcoal briquettes are products that are made of agricultural and forestry organic wastes. It is the kind of recycling energy and it is eco-friendly to use biomass briquettes made by well-designed sawdust charcoal machine in Turkey as fuel.

Every time you turn on the switch of a sawdust charcoal machine in Turkey, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

The well-designedsawdust charcoal machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.

Write a Comment
Comment will be posted once reviewed.