non-polluting sawdust coal machine with long service life

Our non-polluting sawdust coal machine are high-quality equipment. You can use this machine to make charcoal rods that are hollow. Generally, the diameter of the rods are about 50-60 mm long, and the diameter of the hollow part is about 15-20mm. What’s more, the briquetting machines can produce cuboid-shaped and six-sided cylindrical hollow briquettes. If you want to make charcoal products of other shapes, we can customize molds for you.

The main function of non-pollutingsawdust coal machinewith long service life is to make flammable briquettes from forestry wastes and crop wastes such as all kinds of stalks and wood dust through the technique of hot briquetting.

non-pollutingsawdust coal machine can compress powdery materials which contain lignin into briquettes. The molds for making briquettes can be customized. You can use this equipment to make briquettes of three different diameters: 45mm, 50mm, 55mm.

Each non-pollutingsawdust coal machinewith long service life is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

non-pollutingsawdust coal machine employs a steep-lead feeding propeller, so the feeding speed is fast. What’s more, the extruding propeller inside the machine has a small lead, which will save energy.

At the beginning, the raw materials will be crushed into small pieces. If the moisture content of the raw materials is high, then they need to be dried. After the drying process, it comes to the core procedure of the production line: briquetting. After the raw materials are made into briquettes by non-polluting sawdust coal machine with long service life, you can choose to put them into a carbonation furnace to make charcoal briquettes or pack them directly. In general, many people choose to conduct the carbonizing process because charcoal briquettes value more than “raw briquettes” that don’t go through the carbonizing process.

Charcoal briquettes are not only high-quality fuel for domestic cookers, heating stoves and industrial boilers, but also they can be used as clean fuel for power plants. If we can make good use of charcoal briquettes with non-polluting sawdust coal machine with long service life, it will make it possible to realize the sustainable development of energy. In addition, using charcoal briquette as fuel will help a lot to deal with the problems caused by environmental pollution.

The ash of burning biomass briquettes is a kind of high-quality organic potash fertilizer. As a new-type fuel, biomass briquettes are widely acceptable by people. Compared with traditional fuels, biomass briquettes that are made by non-polluting sawdust coal machine are more eco-friendly.

The salesmen of EP Machinery are all very experienced. They can give your best advice and customize best equipment for you according to your requirements. In addition, non-polluting sawdust coal machine you purchase will be checked thoroughly before delivery.

It is common that pilot run should be done before the sawdust coal machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.