commercial sawdust stick making machine for EU market

The commercial sawdust stick making machine can turn forest wastes and crop wastes which contain wood fiber into flammable briquettes through the technique of hot compression molding. Compared with the similar machines of other manufacturers, the biomass briquette machines of our factory are more advanced.

Our biomass briquetting equipment employs corn stalks, corncob, twigs, leaves and saw dust as raw materials. Firstly, you need to use an EP crusher machine to make those materials into small particles or powder. Then the crushed material will be compressed in the commercial sawdust stick making machine for EU market.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. commercial sawdust stick making machine for EU market are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

Each commercial sawdust stick making machine for EU market is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

commercial sawdust stick making machine for EU market adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, commercialsawdust stick making machinefor EU market will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The charcoal briquetting rods made by commercial sawdust stick making machine for EU market are used usually for outdoor barbecue. According to the characters and features of charcoal briquettes, we can also use this fuel in metallurgical industry, chemical industry, food industry, building industry, ceramic industry and stock farming.

Biomass charcoal briquettes made by sawdust stick making machine are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

EP Machinery Company has 9 years’ experience in manufacturing sawdust stick making machine. Over the past years, we have helped many customers start their business in this industry. Importantly, we can provide you with high-quality machines and first-class service.

There are something you should know about installing a sawdust stick making machine for EU market. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.