High Output wood chip briquetting press in South Africa

In the industry of manufacturing charcoal from biomass wastes, High Output wood chip briquetting press and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

Wood dust, crop stalks, peanut shells, branches and rice husk are common materials for High Outputwood chip briquetting press. These materials will be made into briquettes. Next, the processed briquettes will be carbonized in a furnace. After this step, charcoal briquettes will finally be made.

The working principle of High Output wood chip briquetting press in South Africa is quite simple. The crushed materials(twigs, stalks, straws, cotton stalks...) will be added into the feeding port. There is no need to add any adhesive in the powdery materials. Under high temperature and pressure, the materials will be pressed into high-density briquettes.

The core part of the High Output wood chip briquetting press is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

High Output wood chip briquetting press employs a steep-lead feeding propeller, so the feeding speed is fast. What’s more, the extruding propeller inside the machine has a small lead, which will save energy.

This is the simple instruction of the working procedure of charcoal briquette making lines. First of all, the crushing machine will crush the raw material. Then, the drying machine will dry the wet material to some degree. Next, the dried material will be compressed and formed in the wood chip briquetting pressin South Africa. The last step is to carbonize the formed briquettes with carbonation furnaces.

Charcoal briquettes are renewable fuel which is made from biomass wastes by High Output wood chip briquetting press in South Africa. The calorific value of charcoal briquette is higher than common charcoal and coal. Moreover, the briquette is smokeless and odourless when it is burning. Apart from that, there is no poison generated during its burning. It can be applied for home heating and barbecuing.

Biomass briquettes produced by High Outputwood chip briquetting press don’t contain any phosphorus. Therefore, when the briquettes are burning, no sulfur dioxide  and phosphorus pentoxide will be generated. As a result, no acid rain will be formed. We can say using biomass briquettes as fuel is a way to protect the environment.

Our factory is located in Anyang city, Henan province. If you want to buy High Outputwood chip briquetting press from our company, we sincerely hope that you come and visit our factory. When you come, you can see the equipment by yourself. What’s more, we can take you to some factories that are owned by our customers who bought machines from us.

It is common that pilot run should be done before the wood chip briquetting press is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.