non-polluting wood log charcoal making machine for international market

The non-polluting wood log charcoal making machine is also called charcoal stick extruding machine. It employs the working principle of screw extruding briquetting to compress the powdery biomass material into rod-shape solid fuel. This kind of briquette machines has a lot of advantages. For example, its production yield is high and it is energy-saving.

Wood dust, crop stalks, peanut shells, branches and rice husk are common materials for non-pollutingwood log charcoal making machine. These materials will be made into briquettes. Next, the processed briquettes will be carbonized in a furnace. After this step, charcoal briquettes will finally be made.

non-polluting wood log charcoal making machine have used the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.

non-polluting wood log charcoal making machine can be customized according to your requirements. For example, we can customize different molds according to the raw materials. Apart from this point, we can also customize the machines of different production yield.

The scientific structure of the non-pollutingwood log charcoal making machinefor international market makes it possible to operate the machine easily. And you can use the machine to make high-density briquettes. For your reference, the ratio of briquetting of the forming machine is above 96%.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And wood log charcoal making machine for international market and drying machines are important equipment.

In industrial engineering, charcoal briquettes that are made by non-polluting wood log charcoal making machine for international market can take place of coal and heavy oil to be fuel for heating steam boilers. In addition, the charcoal briquette can also be used as material to make activated carbon, silicon carbide and so on. Therefore, charcoal briquettes are necessary material in mosquito-repellent incense plants, explosive factories and casting factories.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by non-polluting wood log charcoal making machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

There will be some unforeseen circumstances while using the non-pollutingwood log charcoal making machine. For example, if material clogs in the feeding port, at this time, you can use a batten or a bamboo cane to solve the problem. Notice: you mustn’t use metal bars which will damage the machine.

It is common that pilot run should be done before the wood log charcoal making machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.