search

Low Cost wood powder briquette machine in Indonesia

2019-10-28 02:56:00
czqwjb009
Original
449
Summary :The Low Cost wood powder briquette machine can turn forest wastes and crop wastes which contain wood fiber into flammable briquettes through the technique of hot compression molding. Compared with the similar machines of other manufacturers, the biomass briquette machines of our factory are more advanced.

Low Cost wood powder briquette machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the  Low Cost wood powder briquette machine.

Low Costwood powder briquette machine can compress powdery materials which contain lignin into briquettes. The molds for making briquettes can be customized. You can use this equipment to make briquettes of three different diameters: 45mm, 50mm, 55mm.

Low Costwood powder briquette machinein Indonesia can be used to press many different kinds of crushed biomass materials. And you can use them in continuous production lines. Besides, it consumes less energy, and it can work efficiently.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Low Cost wood powder briquette machine  runs steadily  and will not make too much noise when working.

At the beginning, the raw materials will be crushed into small pieces. If the moisture content of the raw materials is high, then they need to be dried. After the drying process, it comes to the core procedure of the production line: briquetting. After the raw materials are made into briquettes by Low Cost wood powder briquette machine in Indonesia, you can choose to put them into a carbonation furnace to make charcoal briquettes or pack them directly. In general, many people choose to conduct the carbonizing process because charcoal briquettes value more than “raw briquettes” that don’t go through the carbonizing process.

Charcoal briquettes are not only high-quality fuel for domestic cookers, heating stoves and industrial boilers, but also they can be used as clean fuel for power plants. If we can make good use of charcoal briquettes with Low Costwood powder briquette machinein Indonesia, it will make it possible to realize the sustainable development of energy. In addition, using charcoal briquette as fuel will help a lot to deal with the problems caused by environmental pollution.

Biomass energy has good ecological and social benefits. First of all, using biomass briquettes which are made by Low Cost wood powder briquette machine as fuel will protect the environment. Secondly, it will promote continuous development in agriculture.

Low Cost wood powder briquette machine in Indonesia

The salesmen of EP Machinery are all very experienced. They can give your best advice and customize best equipment for you according to your requirements. In addition, Low Cost wood powder briquette machine you purchase will be checked thoroughly before delivery.

There are something you should know about installing a wood powder briquette machine in Indonesia. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.

Write a Comment
Comment will be posted once reviewed.