Low Cost wood sawdust press machine with best price

The Low Cost wood sawdust press machine is used in charcoal production lines. In general, the whole production line consists of a crusher machine, a drying machine, a briquette machine, a carbonation furnace and some auxiliary equipment. The finished charcoal products are of high density and good flammability.

wood sawdust press machinewith best price takes forestry wastes and crop wastes as material to make briquettes. The forestry wastes and crop wastes include saw dust, corn stalks, beanstalks, sorghum stalks, cotton stalks, peanut vines, sunflower stalks and so on. EP briquette machines can turn biomass wastes into treasure.

It is easy to understand the working principle of Low Costwood sawdust press machinewith best price. Simply speaking, putting the powdery materials in the feeding port. Then the materials will be pressed and formed in the briquetting machine. After that, finished briquettes will come out from the discharging port.

The structure of Low Costwood sawdust press machine is compact. The finished briquettes can be used as fuel directly, or you can put them into a carbonation furnace for deep processing. Our machines can produce high-density briquettes which are solid fuel with high calorific value.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Low Costwood sawdust press machine runs steadily  and will not make too much noise when working.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And wood sawdust press machinewith best price and drying machines are important equipment.

The charcoal sticks made by Low Costwood sawdust press machinewith best price are widely used. For instance, charcoal briquettes can be used for heating in winter in the northern area. What’s more, you can use them to warm greenhouses when it is cold. In addition, you can also use those briquettes as fuel to cook.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by Low Costwood sawdust press machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

The electric controller of the Low Cost wood sawdust press machine with best price adopts high-quality electrical apparatus elements. The overload protector and the leakage protector will protect the machine and the the operator. In addition, to maintain the equipment, you should inject lubrication oil on the rolling bearing regularly.

The Low Costwood sawdust press machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.