Our widely applicable biomass briquetting press machine are high-quality equipment. You can use this machine to make charcoal rods that are hollow. Generally, the diameter of the rods are about 50-60 mm long, and the diameter of the hollow part is about 15-20mm. What’s more, the briquetting machines can produce cuboid-shaped and six-sided cylindrical hollow briquettes. If you want to make charcoal products of other shapes, we can customize molds for you.
Many materials can be used by widely applicablebiomass briquetting press machinewith small investment. Wood shavings, bamboo shavings, branches, twigs, wood offcut and fruit shells are good materials. There is one thing that you should notice is that they are hard material. Thus, the crushing procedure is necessary before forming procedure. And you need a powerful crusher to process those hard materials.
widely applicable biomass briquetting press machine have used the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.
Each widely applicablebiomass briquetting press machinewith small investment is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.
widely applicable biomass briquetting press machine with small investment are highly automatic equipment. This kind of equipment has many different advantages such as large output, reasonable price, low power consumption and easy operation. What’s more, it is convenient to move the machine from one place to another place. In addition, if there is no electric power facilities available, the briquette machines can be powered by diesel engines.
Biomass raw material such as wood branches, bamboo dust and crop stalks need to go through four steps to be finished charcoal products. The four processing steps are crushing process, drying process, briquetting process(widely applicablebiomass briquetting press machine and carbonizing process.
People often use charcoal rods for heating, barbecuing and making hot pot. In the contemporary world, this kind of flammable fuel made by widely applicablebiomass briquetting press machinewith small investment is becoming more and more popular with us. Here are some advantages of it. 1.It is smokeless when burning; 2. its calorific value is high; 3. the burning time of it is quite long.
Biomass briquettes made by biomass briquetting press machinewith small investment are important renewable energy source, and it has gained more and more people’s attention. In addition, it is easy to realize large-scale production of biomass briquettes. And it is convenient to transport and store charcoal briquettes.
Every time you turn on the switch of a biomass briquetting press machine with small investment, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.
It is common that pilot run should be done before the biomass briquetting press machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.