highly automatic bio coal manufacturing machine from EP company

Our biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life. In addition, highly automatic bio coal manufacturing machine are labor-saving equipment. In this way, the cost of investment will be less.

The main function of highly automaticbio coal manufacturing machinefrom EP company is to make flammable briquettes from forestry wastes and crop wastes such as all kinds of stalks and wood dust through the technique of hot briquetting.

The working principle of highly automatic bio coal manufacturing machine from EP company is quite simple. The crushed materials(twigs, stalks, straws, cotton stalks...) will be added into the feeding port. There is no need to add any adhesive in the powdery materials. Under high temperature and pressure, the materials will be pressed into high-density briquettes.

Nowadays, people have attached importance to environment protection. Therefore, the future of eco-friendly equipment is promising. bio coal manufacturing machine from EP company are such equipment and used to process some forestry and crop wastes. The other advantage is the investment of the equipment is small while the return profit of it is high.

highly automatic bio coal manufacturing machine are adaptable for forming all kinds of biomass raw materials into briquettes. The material could be powdery or granular material as long as its moisture content is between 5%-12%. Besides, it is equipped with an electric heating device that can solve the problem of blocking material.

In general, to make charcoal briquettes, crushing process, drying process, briquetting process and carbonizing process will be conducted orderly. Crushing machines are used to crush some material that are large and can not be formed by the  highly automatic bio coal manufacturing machine directly. There are different types of crusher machines of our company. You can choose the suitable one according to the raw material that you plan to use.

People often use charcoal rods for heating, barbecuing and making hot pot. In the contemporary world, this kind of flammable fuel made by highly automaticbio coal manufacturing machinefrom EP company is becoming more and more popular with us. Here are some advantages of it. 1.It is smokeless when burning; 2. its calorific value is high; 3. the burning time of it is quite long.

Biomass briquettes made by bio coal manufacturing machinefrom EP company are important renewable energy source, and it has gained more and more people’s attention. In addition, it is easy to realize large-scale production of biomass briquettes. And it is convenient to transport and store charcoal briquettes.

Every time you turn on the switch of a bio coal manufacturing machinefrom EP company, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

It is common that pilot run should be done before the bio coal manufacturing machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.