Labor-saving saw dust powder machine from Chinese manufacturer

The Labor-saving saw dust powder machine can turn forest wastes and crop wastes which contain wood fiber into flammable briquettes through the technique of hot compression molding. Compared with the similar machines of other manufacturers, the biomass briquette machines of our factory are more advanced.

There are various materials that can be used to make biomass briquettes through  saw dust powder machine from Chinese manufacturer. For instance, you can make use of crop stalks, wood surplus material of forestry, organic wastes of food processing industry to produce biomass briquettes that can be used as fuel.

The structure of Labor-savingsaw dust powder machine is simple. This equipment consists of five parts: frame part, driving part, feeding port, pressing part and conveying part. Our briquette machines are easy to be operated and maintained.

The machines’ stability and durability is pretty high. It is very important to lubricate the equipment regularly. As long as there is no lack of oil in the joints of the machine, the saw dust powder machine can be used for many years.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Labor-saving saw dust powder machine  runs steadily  and will not make too much noise when working.

This is the simple instruction of the working procedure of charcoal briquette making lines. First of all, the crushing machine will crush the raw material. Then, the drying machine will dry the wet material to some degree. Next, the dried material will be compressed and formed in the saw dust powder machine from Chinese manufacturer. The last step is to carbonize the formed briquettes with carbonation furnaces.

The charcoal briquettes that are produced by Labor-saving saw dust powder machine from Chinese manufacturer are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by Labor-saving saw dust powder machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

There is a regulation for using a Labor-saving saw dust powder machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

It is common that pilot run should be done before the saw dust powder machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.