Cheap sawdust brick making machine for EU market

Cheap sawdust brick making machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

Many materials can be used by Cheapsawdust brick making machinefor EU market. Wood shavings, bamboo shavings, branches, twigs, wood offcut and fruit shells are good materials. There is one thing that you should notice is that they are hard material. Thus, the crushing procedure is necessary before forming procedure. And you need a powerful crusher to process those hard materials.

The sawdust brick making machinefor EU market can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

The machines’ stability and durability is pretty high. It is very important to lubricate the equipment regularly. As long as there is no lack of oil in the joints of the machine, the sawdust brick making machine can be used for many years.

The operating method of Cheapsawdust brick making machine is simple, so it is easy to use the machine. With high degree of automation, you don’ t need to hire many workers to operate the machine. In general, one worker will be enough. You can choose to feed material manually or by a conveyor.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, Cheapsawdust brick making machinefor EU market will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

Charcoal briquettes are renewable fuel which is made from biomass wastes by Cheapsawdust brick making machinefor EU market. The calorific value of charcoal briquette is higher than common charcoal and coal. Moreover, the briquette is smokeless and odourless when it is burning. Apart from that, there is no poison generated during its burning. It can be applied for home heating and barbecuing.

Biomass energy has good ecological and social benefits. First of all, using biomass briquettes which are made by Cheapsawdust brick making machine as fuel will protect the environment. Secondly, it will promote continuous development in agriculture.

The main business item of our company is to produce Cheapsawdust brick making machinefor EU market and charcoal briquette production lines. Our briquette machines are eco-friendly equipment and this kind of briquetting machine is one of the best-selling machines on the international market.

The Cheapsawdust brick making machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.