Henan EP Rice Husk Sawdust Extruder Briquette Machine from Henan province

Our Henan EP Rice Husk Sawdust Extruder Briquette Machine are high-quality equipment. You can use this machine to make charcoal rods that are hollow. Generally, the diameter of the rods are about 50-60 mm long, and the diameter of the hollow part is about 15-20mm. What’s more, the briquetting machines can produce cuboid-shaped and six-sided cylindrical hollow briquettes. If you want to make charcoal products of other shapes, we can customize molds for you.

Henan EPRice Husk Sawdust Extruder Briquette Machine of EP Machinery company are high-efficiency and high-quality equipment. Our briquetting equipment can process materials including rice hull, hay, shrubs branches, wood refuse, bamboo refuse and bamboo dust, sugarcane bagasse and so on.

It is easy to understand the working principle of Henan EP Rice Husk Sawdust Extruder Briquette Machine from Henan province. Simply speaking, putting the powdery materials in the feeding port. Then the materials will be pressed and formed in the briquetting machine. After that, finished briquettes will come out from the discharging port.

Each Henan EP Rice Husk Sawdust Extruder Briquette Machine from Henan province is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Henan EP Rice Husk Sawdust Extruder Briquette Machine  runs steadily  and will not make too much noise when working.

At the beginning, the raw materials will be crushed into small pieces. If the moisture content of the raw materials is high, then they need to be dried. After the drying process, it comes to the core procedure of the production line: briquetting. After the raw materials are made into briquettes by Henan EPRice Husk Sawdust Extruder Briquette Machinefrom Henan province, you can choose to put them into a carbonation furnace to make charcoal briquettes or pack them directly. In general, many people choose to conduct the carbonizing process because charcoal briquettes value more than “raw briquettes” that don’t go through the carbonizing process.

The usage amount of charcoal briquettes made by Henan EPRice Husk Sawdust Extruder Briquette Machinefrom Henan province is on the rise gradually. Charcoal sticks are increasingly used in our daily life and industrial production. On the one hand, charcoal sticks can be used in our favorite barbecues. Because charcoal rods are smokeless and odourless, they have become more and more favorable; On the other hand, charcoal briquetting sticks are ideal material for warming in winter.

Researching and developing biomass energy has become a hot topic in the world. The biomass charcoal briquette is one of the research achievements. Make use of biomass briquettes as fuel is cleaner than to use fossil fuels such as oil and coal. Henan EP Rice Husk Sawdust Extruder Briquette Machine from Henan province is an important equipment in this industry

Rice Husk Sawdust Extruder Briquette Machinefrom Henan province can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

It is common that pilot run should be done before the Rice Husk Sawdust Extruder Briquette Machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.