search

Automatic Rice Husk Sawdust Extruder Briquette Machine in Indonesia

2019-11-30 16:11:00
czqwjb009
Original
557
Summary :The Automatic Rice Husk Sawdust Extruder Briquette Machine is used in charcoal production lines. In general, the whole production line consists of a crusher machine, a drying machine, a briquette machine, a carbonation furnace and some auxiliary equipment. The finished charcoal products are of high density and good flammability.

Our Automatic Rice Husk Sawdust Extruder Briquette Machine are high-quality equipment. You can use this machine to make charcoal rods that are hollow. Generally, the diameter of the rods are about 50-60 mm long, and the diameter of the hollow part is about 15-20mm. What’s more, the briquetting machines can produce cuboid-shaped and six-sided cylindrical hollow briquettes. If you want to make charcoal products of other shapes, we can customize molds for you.

AutomaticRice Husk Sawdust Extruder Briquette Machine of EP Machinery company are high-efficiency and high-quality equipment. Our briquetting equipment can process materials including rice hull, hay, shrubs branches, wood refuse, bamboo refuse and bamboo dust, sugarcane bagasse and so on.

Automatic Rice Husk Sawdust Extruder Briquette Machine in Indonesia employ the working principle of extruding materials under high pressure and high temperature. The components of EP biomass briquetting equipment are made of high-quality material.

Automatic Rice Husk Sawdust Extruder Briquette Machine in Indonesia

It is widely acknowledged in the market that AutomaticRice Husk Sawdust Extruder Briquette Machine are  durable equipment. Here is the reason why our machines are long-lasting products. The main parts of the machines are made from special wear-resistant material.

AutomaticRice Husk Sawdust Extruder Briquette Machine employs a steep-lead feeding propeller, so the feeding speed is fast. What’s more, the extruding propeller inside the machine has a small lead, which will save energy.

This is the simple instruction of the working procedure of charcoal briquette making lines. First of all, the crushing machine will crush the raw material. Then, the drying machine will dry the wet material to some degree. Next, the dried material will be compressed and formed in the Rice Husk Sawdust Extruder Briquette Machinein Indonesia. The last step is to carbonize the formed briquettes with carbonation furnaces.

The charcoal sticks made by AutomaticRice Husk Sawdust Extruder Briquette Machinein Indonesia are widely used. For instance, charcoal briquettes can be used for heating in winter in the northern area. What’s more, you can use them to warm greenhouses when it is cold. In addition, you can also use those briquettes as fuel to cook.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by Automatic Rice Husk Sawdust Extruder Briquette Machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

Our factory is located in Anyang city, Henan province. If you want to buy AutomaticRice Husk Sawdust Extruder Briquette Machine from our company, we sincerely hope that you come and visit our factory. When you come, you can see the equipment by yourself. What’s more, we can take you to some factories that are owned by our customers who bought machines from us.

It is common that pilot run should be done before the Rice Husk Sawdust Extruder Briquette Machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.

Write a Comment
Comment will be posted once reviewed.