durable Rice Husk Sawdust Extruder Briquette Machine for international market

The durable Rice Husk Sawdust Extruder Briquette Machine are high-efficiency and energy-saving equipment. Nowadays, people are paying more and more attention to environment protection. And biomass briquetting machines can turn some plant wastes into useful charcoal, which will protect environment indirectly. Therefore, biomass briquette machines play an important role in this field.

Our biomass briquetting equipment employs corn stalks, corncob, twigs, leaves and saw dust as raw materials. Firstly, you need to use an EP crusher machine to make those materials into small particles or powder. Then the crushed material will be compressed in the durable Rice Husk Sawdust Extruder Briquette Machine for international market.

The Rice Husk Sawdust Extruder Briquette Machine for international market can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

Nowadays, people have attached importance to environment protection. Therefore, the future of eco-friendly equipment is promising. Rice Husk Sawdust Extruder Briquette Machine for international market are such equipment and used to process some forestry and crop wastes. The other advantage is the investment of the equipment is small while the return profit of it is high.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so durable Rice Husk Sawdust Extruder Briquette Machine  runs steadily  and will not make too much noise when working.

At the beginning, the raw materials will be crushed into small pieces. If the moisture content of the raw materials is high, then they need to be dried. After the drying process, it comes to the core procedure of the production line: briquetting. After the raw materials are made into briquettes by durableRice Husk Sawdust Extruder Briquette Machinefor international market, you can choose to put them into a carbonation furnace to make charcoal briquettes or pack them directly. In general, many people choose to conduct the carbonizing process because charcoal briquettes value more than “raw briquettes” that don’t go through the carbonizing process.

The charcoal sticks made by durableRice Husk Sawdust Extruder Briquette Machinefor international market are widely used. For instance, charcoal briquettes can be used for heating in winter in the northern area. What’s more, you can use them to warm greenhouses when it is cold. In addition, you can also use those briquettes as fuel to cook.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by durable Rice Husk Sawdust Extruder Briquette Machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

EP Machinery Company has 9 years’ experience in manufacturing Rice Husk Sawdust Extruder Briquette Machine. Over the past years, we have helped many customers start their business in this industry. Importantly, we can provide you with high-quality machines and first-class service.

It is common that pilot run should be done before the Rice Husk Sawdust Extruder Briquette Machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.