highly automatic bio briquettes machine of trustworthy supplier

highly automatic bio briquettes machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the highly automaticbio briquettes machine.

highly automaticbio briquettes machine have used the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.

It is widely acknowledged in the market that highly automaticbio briquettes machine are  durable equipment. Here is the reason why our machines are long-lasting products. The main parts of the machines are made from special wear-resistant material.

highly automaticbio briquettes machineof trustworthy supplier adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

This is the simple instruction of the working procedure of charcoal briquette making lines. First of all, the crushing machine will crush the raw material. Then, the drying machine will dry the wet material to some degree. Next, the dried material will be compressed and formed in the bio briquettes machineof trustworthy supplier. The last step is to carbonize the formed briquettes with carbonation furnaces.

Charcoal rods which are produced by highly automatic bio briquettes machine of trustworthy supplier can be used in steel mills in order to make high-quality steel. In a word, charcoal briquettes are widely used in different industries, and the market demand of it also becomes large. As a result, biomass briquette machines are widely praised.in the international market. The usage of biomass briquette machines has greatly reduced the cost of making people's charcoal sticks, while profit multiples at the same time.

Researching and developing biomass energy has become a hot topic in the world. The biomass charcoal briquette is one of the research achievements. Make use of biomass briquettes as fuel is cleaner than to use fossil fuels such as oil and coal. highly automaticbio briquettes machineof trustworthy supplier is an important equipment in this industry

Our factory is located in Anyang city, Henan province. If you want to buy  highly automatic bio briquettes machine from our company, we sincerely hope that you come and visit our factory. When you come, you can see the equipment by yourself. What’s more, we can take you to some factories that are owned by our customers who bought machines from us.

It is common that pilot run should be done before the bio briquettes machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.