Automatic bio coal briquetting machine of EP Machinery

Automatic bio coal briquetting machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

There are various materials that can be used to make biomass briquettes through  bio coal briquetting machine of EP Machinery. For instance, you can make use of crop stalks, wood surplus material of forestry, organic wastes of food processing industry to produce biomass briquettes that can be used as fuel.

The bio coal briquetting machine of EP Machinery can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

The machines’ stability and durability is pretty high. It is very important to lubricate the equipment regularly. As long as there is no lack of oil in the joints of the machine, the bio coal briquetting machine can be used for many years.

The operating method of Automatic bio coal briquetting machine is simple, so it is easy to use the machine. With high degree of automation, you don’ t need to hire many workers to operate the machine. In general, one worker will be enough. You can choose to feed material manually or by a conveyor.

A charcoal briquette production line basically consists of a crushing machine, a dryer, a Automatic bio coal briquetting machine and a carbonation furnace. These machines are placed in order to make high-quality charcoal briquettes. What’s more, you can also equip an packing machine behind the carbonation furnace.

The charcoal briquettes that are produced by Automatic bio coal briquetting machine of EP Machinery are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass fuel’s development can restrain the price of crude oil in the international market. Biomass charcoal briquettes made by bio coal briquetting machineof EP Machinery can take place of the traditional fossil energy such as coal and oil. Thus, the country’s import volume of oil will decrease. And the amount of carbon dioxide emitted in air by human activity will be reduced.

The electric controller of the Automatic bio coal briquetting machine of EP Machinery adopts high-quality electrical apparatus elements. The overload protector and the leakage protector will protect the machine and the the operator. In addition, to maintain the equipment, you should inject lubrication oil on the rolling bearing regularly.

It is common that pilot run should be done before the bio coal briquetting machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.