High Yield bio coal manufacturing machine Supplier

In the industry of manufacturing charcoal from biomass wastes, High Yield bio coal manufacturing machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

Wood dust, crop stalks, peanut shells, branches and rice husk are common materials for High Yield bio coal manufacturing machine. These materials will be made into briquettes. Next, the processed briquettes will be carbonized in a furnace. After this step, charcoal briquettes will finally be made.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. High Yieldbio coal manufacturing machineSupplier are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

This equipment is designed reasonably. What’s more, they are high-quality bio coal manufacturing machine with a simple structure. In addition, biomass briquette machines are small in size, so the space demand of the machine is small. Moreover, the equipment is energy-saving and labor-saving.

High Yieldbio coal manufacturing machineSupplier adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, High Yield bio coal manufacturing machine Supplier will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

Charcoal briquettes are not only high-quality fuel for domestic cookers, heating stoves and industrial boilers, but also they can be used as clean fuel for power plants. If we can make good use of charcoal briquettes with High Yield bio coal manufacturing machine Supplier, it will make it possible to realize the sustainable development of energy. In addition, using charcoal briquette as fuel will help a lot to deal with the problems caused by environmental pollution.

Researching and developing biomass energy has become a hot topic in the world. The biomass charcoal briquette is one of the research achievements. Make use of biomass briquettes as fuel is cleaner than to use fossil fuels such as oil and coal. High Yieldbio coal manufacturing machineSupplier is an important equipment in this industry

There will be some unforeseen circumstances while using the High Yieldbio coal manufacturing machine. For example, if material clogs in the feeding port, at this time, you can use a batten or a bamboo cane to solve the problem. Notice: you mustn’t use metal bars which will damage the machine.

It is common that pilot run should be done before the bio coal manufacturing machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.