Labor-saving bio-fuel making machine with reasonable price

Labor-saving bio-fuel making machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

Labor-saving bio-fuel making machine with reasonable price are able to make use of many different biomass wastes. Apart from this source of raw material, you can also plant some “energy plants” that contains a lot of lignin on unfertile farmland. Then you can take these energy plants as raw material for briquetting.

The working principle of bio-fuel making machine with reasonable price is to make powdery ligneous materials into rod-shaped solid fuel under the condition of high pressure and temperature. And the inside temperature of the machine is adjustable.

This equipment is designed reasonably. What’s more, they are high-quality  bio-fuel making machine with a simple structure. In addition, biomass briquette machines are small in size, so the space demand of the machine is small. Moreover, the equipment is energy-saving and labor-saving.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Labor-savingbio-fuel making machine runs steadily  and will not make too much noise when working.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And bio-fuel making machine with reasonable price and drying machines are important equipment.

The usage amount of charcoal briquettes made by Labor-savingbio-fuel making machinewith reasonable price is on the rise gradually. Charcoal sticks are increasingly used in our daily life and industrial production. On the one hand, charcoal sticks can be used in our favorite barbecues. Because charcoal rods are smokeless and odourless, they have become more and more favorable; On the other hand, charcoal briquetting sticks are ideal material for warming in winter.

Biomass fuel’s development can restrain the price of crude oil in the international market. Biomass charcoal briquettes made by bio-fuel making machinewith reasonable price can take place of the traditional fossil energy such as coal and oil. Thus, the country’s import volume of oil will decrease. And the amount of carbon dioxide emitted in air by human activity will be reduced.

bio-fuel making machinewith reasonable price can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

The Labor-saving bio-fuel making machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.