ISO Quality biomass brick machine with reasonable price

In the industry of manufacturing charcoal from biomass wastes, ISO Quality biomass brick machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

Many materials can be used by ISO Qualitybiomass brick machinewith reasonable price. Wood shavings, bamboo shavings, branches, twigs, wood offcut and fruit shells are good materials. There is one thing that you should notice is that they are hard material. Thus, the crushing procedure is necessary before forming procedure. And you need a powerful crusher to process those hard materials.

ISO Qualitybiomass brick machinewith reasonable price employ the working principle of extruding materials under high pressure and high temperature. The components of EP biomass briquetting equipment are made of high-quality material.

The machines’ stability and durability is pretty high. It is very important to lubricate the equipment regularly. As long as there is no lack of oil in the joints of the machine, the biomass brick machine can be used for many years.

ISO Qualitybiomass brick machinewith reasonable price adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, ISO Quality biomass brick machine with reasonable price will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The charcoal briquettes that are produced by ISO Quality biomass brick machine with reasonable price are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass charcoal briquettes made by biomass brick machine are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

There is a regulation for using a ISO Quality biomass brick machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

The ISO Qualitybiomass brick machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.