search

High Output biomass brick machine in Turkey

2019-10-28 22:56:00
czqwjb009
Original
522
Summary :Our High Output biomass brick machine are high-quality equipment. You can use this machine to make charcoal rods that are hollow. Generally, the diameter of the rods are about 50-60 mm long, and the diameter of the hollow part is about 15-20mm. What’s more, the briquetting machines can produce cuboid-shaped and six-sided cylindrical hollow briquettes. If you want to make charcoal products of other shapes, we can customize molds for you.

Our biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life. In addition, High Output biomass brick machine are labor-saving equipment. In this way, the cost of investment will be less.

The main function of High Output biomass brick machine in Turkey is to make flammable briquettes from forestry wastes and crop wastes such as all kinds of stalks and wood dust through the technique of hot briquetting.

High Outputbiomass brick machine have used the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.

High Outputbiomass brick machine can be customized according to your requirements. For example, we can customize different molds according to the raw materials. Apart from this point, we can also customize the machines of different production yield.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so High Output biomass brick machine  runs steadily  and will not make too much noise when working.

The main equipment of the charcoal briquette making line include four kinds of machines: crusher machines, dryer machines, biomass brick machine and carbonation furnaces. These machines will be used one after another. Namely, the producing process goes in this way: 1.crushing 2. drying 3. forming 4. carbonation.

Charcoal briquettes are not only high-quality fuel for domestic cookers, heating stoves and industrial boilers, but also they can be used as clean fuel for power plants. If we can make good use of charcoal briquettes with High Output biomass brick machine in Turkey, it will make it possible to realize the sustainable development of energy. In addition, using charcoal briquette as fuel will help a lot to deal with the problems caused by environmental pollution.

High Output biomass brick machine in Turkey

Biomass charcoal briquettes are products that are made of agricultural and forestry organic wastes. It is the kind of recycling energy and it is eco-friendly to use biomass briquettes made by High Output biomass brick machine in Turkey as fuel.

biomass brick machine in Turkey can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

It is common that pilot run should be done before the biomass brick machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.

Write a Comment
Comment will be posted once reviewed.