well-designed biomass briquette press machine for Sale

Our biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life. In addition, well-designed biomass briquette press machine are labor-saving equipment. In this way, the cost of investment will be less.

Our biomass briquetting equipment employs corn stalks, corncob, twigs, leaves and saw dust as raw materials. Firstly, you need to use an EP crusher machine to make those materials into small particles or powder. Then the crushed material will be compressed in the well-designed biomass briquette press machine for Sale.

well-designedbiomass briquette press machinefor Sale employ the working principle of extruding materials under high pressure and high temperature. The components of EP biomass briquetting equipment are made of high-quality material.

well-designed biomass briquette press machine can be customized according to your requirements. For example, we can customize different molds according to the raw materials. Apart from this point, we can also customize the machines of different production yield.

well-designed biomass briquette press machine for Sale’s pinch roller has a function of automatic regulating. This function will adopt bi-rolling principle of the thrust bearings to automatically adjust pressure, so that the material in the machine will not agglomerate. All in all, the function will guarantee the forming effect.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, well-designed biomass briquette press machine for Sale will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

Charcoal rods which are produced by well-designed biomass briquette press machine for Sale can be used in steel mills in order to make high-quality steel. In a word, charcoal briquettes are widely used in different industries, and the market demand of it also becomes large. As a result, biomass briquette machines are widely praised.in the international market. The usage of biomass briquette machines has greatly reduced the cost of making people's charcoal sticks, while profit multiples at the same time.

The ash of burning biomass briquettes is a kind of high-quality organic potash fertilizer. As a new-type fuel, biomass briquettes are widely acceptable by people. Compared with traditional fuels, biomass briquettes that are made by well-designedbiomass briquette press machine are more eco-friendly.

There will be some unforeseen circumstances while using the well-designedbiomass briquette press machine. For example, if material clogs in the feeding port, at this time, you can use a batten or a bamboo cane to solve the problem. Notice: you mustn’t use metal bars which will damage the machine.

It is common that pilot run should be done before the biomass briquette press machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.