Customizable biomass charcoal line in China

The Customizable biomass charcoal line is used in charcoal production lines. In general, the whole production line consists of a crusher machine, a drying machine, a briquette machine, a carbonation furnace and some auxiliary equipment. The finished charcoal products are of high density and good flammability.

biomass charcoal linein China takes forestry wastes and crop wastes as material to make briquettes. The forestry wastes and crop wastes include saw dust, corn stalks, beanstalks, sorghum stalks, cotton stalks, peanut vines, sunflower stalks and so on. EP briquette machines can turn biomass wastes into treasure.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. Customizable biomass charcoal line in China are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

Nowadays, people have attached importance to environment protection. Therefore, the future of eco-friendly equipment is promising. biomass charcoal line in China are such equipment and used to process some forestry and crop wastes. The other advantage is the investment of the equipment is small while the return profit of it is high.

Customizablebiomass charcoal linein China are highly automatic equipment. This kind of equipment has many different advantages such as large output, reasonable price,  low power consumption and easy operation. What’s more, it is convenient to move the machine from one place to another place. In addition, if there is no electric power facilities available, the briquette machines can be powered by diesel engines.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, Customizable biomass charcoal line in China will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The charcoal briquetting rods made by Customizable biomass charcoal line in China are used usually for outdoor barbecue. According to the characters and features of charcoal briquettes, we can also use this fuel in metallurgical industry, chemical industry, food industry, building industry, ceramic industry and stock farming.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by Customizablebiomass charcoal line are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

Every time you turn on the switch of a biomass charcoal line in China, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

There are something you should know about installing a biomass charcoal line in China. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.