Customizable biomass charcoal line with long service life

The Customizable biomass charcoal line is used in charcoal production lines. In general, the whole production line consists of a crusher machine, a drying machine, a briquette machine, a carbonation furnace and some auxiliary equipment. The finished charcoal products are of high density and good flammability.

Wood dust, crop stalks, peanut shells, branches and rice husk are common materials for Customizablebiomass charcoal line. These materials will be made into briquettes. Next, the processed briquettes will be carbonized in a furnace. After this step, charcoal briquettes will finally be made.

The biomass charcoal line with long service life can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

The machines’ stability and durability is pretty high. It is very important to lubricate the equipment regularly. As long as there is no lack of oil in the joints of the machine, the biomass charcoal line can be used for many years.

The scientific structure of the Customizablebiomass charcoal linewith long service life makes it possible to operate the machine easily. And you can use the machine to make high-density briquettes. For your reference, the ratio of briquetting of the forming machine is above 96%.

In general, to make charcoal briquettes, crushing process, drying process, briquetting process and carbonizing process will be conducted orderly. Crushing machines are used to crush some material that are large and can not be formed by the  Customizable biomass charcoal line directly. There are different types of crusher machines of our company. You can choose the suitable one according to the raw material that you plan to use.

The charcoal briquettes that are produced by Customizablebiomass charcoal linewith long service life are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass charcoal briquettes are products that are made of agricultural and forestry organic wastes. It is the kind of recycling energy and it is eco-friendly to use biomass briquettes made by Customizable biomass charcoal line with long service life as fuel.

There is a regulation for using a Customizablebiomass charcoal line. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

The Customizablebiomass charcoal line should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.