environmental friendly biomass charcoal line of charcoal production lines

environmental friendly biomass charcoal line are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

environmental friendlybiomass charcoal lineof charcoal production lines are able to make use of many different biomass wastes. Apart from this source of raw material, you can also plant some “energy plants” that contains a lot of lignin on unfertile farmland. Then you can take these energy plants as raw material for briquetting.

Ligneous materials have some inherent characteristics which determine that they can be made into briquettes as solid fuel. environmental friendly biomass charcoal line of charcoal production lines are designed to process these ligneous materials. Under high pressure, the spiral extruding device in the machine will press the material into briquettes.

The structure of environmental friendly biomass charcoal line is compact. The finished briquettes can be used as fuel directly, or you can put them into a carbonation furnace for deep processing. Our machines can produce high-density briquettes which are solid fuel with high calorific value.

environmental friendly biomass charcoal line of charcoal production lines adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, environmental friendlybiomass charcoal lineof charcoal production lines will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The charcoal sticks made by environmental friendlybiomass charcoal lineof charcoal production lines are widely used. For instance, charcoal briquettes can be used for heating in winter in the northern area. What’s more, you can use them to warm greenhouses when it is cold. In addition, you can also use those briquettes as fuel to cook.

Developing biomass energy has driving effects on agricultural fields. For example, crop stalks, wood dust, bamboo dust, tree branches are valueless agricultural wastes. However, you can use environmental friendly biomass charcoal line to turn them into flammable briquettes which can be sold.

The salesmen of EP Machinery are all very experienced. They can give your best advice and customize best equipment for you according to your requirements. In addition, environmental friendlybiomass charcoal line you purchase will be checked thoroughly before delivery.

The environmental friendlybiomass charcoal line should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.