search

high efficiency biomass charcoal machine from Henan province

2019-10-23 22:56:00
czqwjb009
Original
478
Summary :Our biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life. In addition, high efficiency biomass charcoal machine are labor-saving equipment. In this way, the cost of investment will be less.

Our high efficiency biomass charcoal machine are high-quality equipment. You can use this machine to make charcoal rods that are hollow. Generally, the diameter of the rods are about 50-60 mm long, and the diameter of the hollow part is about 15-20mm. What’s more, the briquetting machines can produce cuboid-shaped and six-sided cylindrical hollow briquettes. If you want to make charcoal products of other shapes, we can customize molds for you.

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the high efficiencybiomass charcoal machine.

high efficiency biomass charcoal machine have used the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.

high efficiencybiomass charcoal machinefrom Henan province can be used to press many different kinds of crushed biomass materials. And you can use them in continuous production lines. Besides, it consumes less energy, and it can work efficiently.

high efficiency biomass charcoal machine from Henan province

The operating method of high efficiencybiomass charcoal machine is simple, so it is easy to use the machine. With high degree of automation, you don’ t need to hire many workers to operate the machine. In general, one worker will be enough. You can choose to feed material manually or by a conveyor.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, high efficiency biomass charcoal machine from Henan province will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The charcoal briquettes that are produced by high efficiencybiomass charcoal machinefrom Henan province are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

The ash of burning biomass briquettes is a kind of high-quality organic potash fertilizer. As a new-type fuel, biomass briquettes are widely acceptable by people. Compared with traditional fuels, biomass briquettes that are made by high efficiencybiomass charcoal machine are more eco-friendly.

biomass charcoal machine from Henan province can make powdery and small granular material that contain lignin into briquettes. In order to produce high-quality briquettes, you should use material that is shorter than 3mm. Generally, a crushing machine will be used before the briquette machine to make material into suitable powder.

It is common that pilot run should be done before the biomass charcoal machine is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.

Write a Comment
Comment will be posted once reviewed.