search

Low Cost biomass charcoal production line for EU market

2019-10-15 02:56:00
czqwjb009
Original
531
Summary :Our Low Cost biomass charcoal production line are high-quality equipment. You can use this machine to make charcoal rods that are hollow. Generally, the diameter of the rods are about 50-60 mm long, and the diameter of the hollow part is about 15-20mm. What’s more, the briquetting machines can produce cuboid-shaped and six-sided cylindrical hollow briquettes. If you want to make charcoal products of other shapes, we can customize molds for you.

The Low Cost biomass charcoal production line is used in charcoal production lines. In general, the whole production line consists of a crusher machine, a drying machine, a briquette machine, a carbonation furnace and some auxiliary equipment. The finished charcoal products are of high density and good flammability.

Low Cost biomass charcoal production line for EU market

EP biomass briquetting machines can take many biomass wastes as material. Some of them need to be crushed into small particles before the briquetteing process. The most common materials are saw dust and rice husk. These two kinds of materials are small enough, so it is not necessary to crush them before putting them into the Low Costbiomass charcoal production line.

The structure of Low Costbiomass charcoal production line is simple. This equipment consists of five parts: frame part, driving part, feeding port, pressing part and conveying part. Our briquette machines are easy to be operated and maintained.

The structure of Low Costbiomass charcoal production line is compact. The finished briquettes can be used as fuel directly, or you can put them into a carbonation furnace for deep processing. Our machines can produce high-density briquettes which are solid fuel with high calorific value.

Low Cost biomass charcoal production line employs a steep-lead feeding propeller, so the feeding speed is fast. What’s more, the extruding propeller inside the machine has a small lead, which will save energy.

Biomass raw material such as wood branches, bamboo dust and crop stalks need to go through four steps to be finished charcoal products. The four processing steps are crushing process, drying process, briquetting process(Low Cost biomass charcoal production line and carbonizing process.

In industrial engineering, charcoal briquettes that are made by Low Cost biomass charcoal production line for EU market can take place of coal and heavy oil to be fuel for heating steam boilers. In addition, the charcoal briquette can also be used as material to make activated carbon, silicon carbide and so on. Therefore, charcoal briquettes are necessary material in mosquito-repellent incense plants, explosive factories and casting factories.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by Low Costbiomass charcoal production line are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

EP Machinery Company has 9 years’ experience in manufacturing biomass charcoal production line. Over the past years, we have helped many customers start their business in this industry. Importantly, we can provide you with high-quality machines and first-class service.

The Low Costbiomass charcoal production line should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.

Write a Comment
Comment will be posted once reviewed.