search

EP biomass energy machine of charcoal production lines

2019-12-01 22:11:00
czqwjb009
Original
544
Summary :The EP biomass energy machine is used in charcoal production lines. In general, the whole production line consists of a crusher machine, a drying machine, a briquette machine, a carbonation furnace and some auxiliary equipment. The finished charcoal products are of high density and good flammability.

Our biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life. In addition, EP biomass energy machine are labor-saving equipment. In this way, the cost of investment will be less.

EPbiomass energy machineof charcoal production lines are able to make use of many different biomass wastes. Apart from this source of raw material, you can also plant some “energy plants” that contains a lot of lignin on unfertile farmland. Then you can take these energy plants as raw material for briquetting.

It is easy to understand the working principle of EPbiomass energy machineof charcoal production lines. Simply speaking, putting the powdery materials in the feeding port. Then the materials will be pressed and formed in the briquetting machine. After that, finished briquettes will come out from the discharging port.

EP biomass energy machine of charcoal production lines

Nowadays, people have attached importance to environment protection. Therefore, the future of eco-friendly equipment is promising. biomass energy machine of charcoal production lines are such equipment and used to process some forestry and crop wastes. The other advantage is the investment of the equipment is small while the return profit of it is high.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so EP biomass energy machine  runs steadily  and will not make too much noise when working.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, EP biomass energy machine of charcoal production lines will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The charcoal briquetting rods made by EP biomass energy machine of charcoal production lines are used usually for outdoor barbecue. According to the characters and features of charcoal briquettes, we can also use this fuel in metallurgical industry, chemical industry, food industry, building industry, ceramic industry and stock farming.

The ash of burning biomass briquettes is a kind of high-quality organic potash fertilizer. As a new-type fuel, biomass briquettes are widely acceptable by people. Compared with traditional fuels, biomass briquettes that are made by EPbiomass energy machine are more eco-friendly.

There will be some unforeseen circumstances while using the EPbiomass energy machine. For example, if material clogs in the feeding port, at this time, you can use a batten or a bamboo cane to solve the problem. Notice: you mustn’t use metal bars which will damage the machine.

There are something you should know about installing a biomass energy machine of charcoal production lines. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.

Write a Comment
Comment will be posted once reviewed.