Labor-saving biomass extruder machine for waste recycling

To some degree, Labor-saving biomass extruder machine are eco-friendly equipment, so the investment prospect of this kind of machine is promising. Currently, biomass briquetting equipment is widely used in the fields of industrial engineering, agricultural industry, stock farming, chemical industry, metallurgy, heating and so on.

Labor-savingbiomass extruder machine of EP Machinery company are high-efficiency and high-quality equipment. Our briquetting equipment can process materials including rice hull, hay, shrubs branches, wood refuse, bamboo refuse and bamboo dust, sugarcane bagasse and so on.

The structure of Labor-savingbiomass extruder machine is simple. This equipment consists of five parts: frame part, driving part, feeding port, pressing part and conveying part. Our briquette machines are easy to be operated and maintained.

It is widely acknowledged in the market that Labor-savingbiomass extruder machine are  durable equipment. Here is the reason why our machines are long-lasting products. The main parts of the machines are made from special wear-resistant material.

The briquetting speed of Labor-saving biomass extruder machine is fast. It can make briquette of 180 centimeters per minute. The service life of the equipment is 10 times longer than common machines in the market.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, Labor-saving biomass extruder machine for waste recycling will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The charcoal briquettes that are produced by Labor-saving biomass extruder machine for waste recycling are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

The ash of burning biomass briquettes is a kind of high-quality organic potash fertilizer. As a new-type fuel, biomass briquettes are widely acceptable by people. Compared with traditional fuels, biomass briquettes that are made by Labor-saving biomass extruder machine are more eco-friendly.

Every time you turn on the switch of a biomass extruder machinefor waste recycling, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

There are something you should know about installing a biomass extruder machinefor waste recycling. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.