E.P long-life biomass press machine

E.P new-type biomass briquette making machines are made of special wear-resistant material. Thus, compared with old-version equipment, the refined briquette machines have longer life span. In addition, our biomass press machines are labor-saving and energy-saving equipment. In this way, the cost of investment will be reduced.

E.P new-type biomass briquette press machines are able to make use of many different biomass wastes. Besides,  you can also plant some “energy plants” that contains a lot of lignin on unfertile farmland. Then you can take these energy plants as raw material for making briquette.

Our biomass press machines with long service life employ the working principle of extruding materials under high pressure and high temperature. The components of EP biomass briquetting equipment are made of durable material.

Each long-life biomass press machine with long service life is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

E.P biomass press machine adopts v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also function as overload protection device. Moreover, there are two connectiing modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connecting mode according actual situation.

The working flow of producing charcoal briquette goes in the following order: crushing raw material, drying material, briquetting material into hollow rods, carbonizing the rods in furnaces. Throughout the whole production line , many different machines are needed. And biomass press machinewith long service life and drying machines are important equipment.

The charcoal briquettes that are produced by E.P biomass press machine are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by long-lifebiomass press machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

There is a regulation for using a biomass press machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

Pilot run should be done before the biomass press machine is put into use. Biomass briquette equipment is no exception. The biomass briquette making machine should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.