widely applicable biomass screw press made in Zhengzhou city

In the industry of manufacturing charcoal from biomass wastes, widely applicable biomass screw press and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

The main function of widely applicable biomass screw press made in Zhengzhou city is to make flammable briquettes from forestry wastes and crop wastes such as all kinds of stalks and wood dust through the technique of hot briquetting.

The working principle of widely applicable biomass screw press made in Zhengzhou city is quite simple. The crushed materials(twigs, stalks, straws, cotton stalks...) will be added into the feeding port. There is no need to add any adhesive in the powdery materials. Under high temperature and pressure, the materials will be pressed into high-density briquettes.

The core part of the widely applicablebiomass screw press is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so widely applicable biomass screw press  runs steadily  and will not make too much noise when working.

In general, to make charcoal briquettes, crushing process, drying process, briquetting process and carbonizing process will be conducted orderly. Crushing machines are used to crush some material that are large and can not be formed by the  widely applicable biomass screw press directly. There are different types of crusher machines of our company. You can choose the suitable one according to the raw material that you plan to use.

Charcoal briquettes are not only high-quality fuel for domestic cookers, heating stoves and industrial boilers, but also they can be used as clean fuel for power plants. If we can make good use of charcoal briquettes with widely applicablebiomass screw pressmade in Zhengzhou city, it will make it possible to realize the sustainable development of energy. In addition, using charcoal briquette as fuel will help a lot to deal with the problems caused by environmental pollution.

Biomass charcoal briquettes made by biomass screw press are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

The main business item of our company is to produce widely applicablebiomass screw pressmade in Zhengzhou city and charcoal briquette production lines. Our briquette machines are eco-friendly equipment and this kind of briquetting machine is one of the best-selling machines on the international market.

It is common that pilot run should be done before the biomass screw press is put into use. Biomass briquette equipment is no exception. It should idle without any load for about 3 minutes at the beginning. If everything goes smoothly, you can add some material into the feeding port.