Professional biomass screw press from professional manufacture

The Professional biomass screw press are high-efficiency and energy-saving equipment. Nowadays, people are paying more and more attention to environment protection. And biomass briquetting machines can turn some plant wastes into useful charcoal, which will protect environment indirectly. Therefore, biomass briquette machines play an important role in this field.

Professionalbiomass screw pressfrom professional manufacture are able to make use of many different biomass wastes. Apart from this source of raw material, you can also plant some “energy plants” that contains a lot of lignin on unfertile farmland. Then you can take these energy plants as raw material for briquetting.

The working principle of Professional biomass screw press from professional manufacture is quite simple. The crushed materials(twigs, stalks, straws, cotton stalks...) will be added into the feeding port. There is no need to add any adhesive in the powdery materials. Under high temperature and pressure, the materials will be pressed into high-density briquettes.

Each Professionalbiomass screw pressfrom professional manufacture is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

Professionalbiomass screw press are adaptable for forming all kinds of biomass raw materials into briquettes. The material could be powdery or granular material as long as its moisture content is between 5%-12%. Besides, it is equipped with an electric heating device that can solve the problem of blocking material.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, Professional biomass screw press from professional manufacture will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

In industrial engineering, charcoal briquettes that are made by Professionalbiomass screw pressfrom professional manufacture can take place of coal and heavy oil to be fuel for heating steam boilers. In addition, the charcoal briquette can also be used as material to make activated carbon, silicon carbide and so on. Therefore, charcoal briquettes are necessary material in mosquito-repellent incense plants, explosive factories and casting factories.

Biomass briquettes made by biomass screw pressfrom professional manufacture are important renewable energy source, and it has gained more and more people’s attention. In addition, it is easy to realize large-scale production of biomass briquettes. And it is convenient to transport and store charcoal briquettes.

There is a regulation for using a Professional biomass screw press. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

There are something you should know about installing a biomass screw press from professional manufacture. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.