Cheap briquette press machine for straw from Chinese manufacturer

The Cheap briquette press machine for straw can turn forest wastes and crop wastes which contain wood fiber into flammable briquettes through the technique of hot compression molding. Compared with the similar machines of other manufacturers, the biomass briquette machines of our factory are more advanced.

Many materials can be used by Cheap briquette press machine for straw from Chinese manufacturer. Wood shavings, bamboo shavings, branches, twigs, wood offcut and fruit shells are good materials. There is one thing that you should notice is that they are hard material. Thus, the crushing procedure is necessary before forming procedure. And you need a powerful crusher to process those hard materials.

The working principle of Cheap briquette press machine for straw from Chinese manufacturer is quite simple. The crushed materials(twigs, stalks, straws, cotton stalks...) will be added into the feeding port. There is no need to add any adhesive in the powdery materials. Under high temperature and pressure, the materials will be pressed into high-density briquettes.

The machines’ stability and durability is pretty high. It is very important to lubricate the equipment regularly. As long as there is no lack of oil in the joints of the machine, the briquette press machine for straw can be used for many years.

The briquetting speed of Cheapbriquette press machine for straw is fast. It can make briquette of 180 centimeters per minute. The service life of the equipment is 10 times longer than common machines in the market.

In general, to make charcoal briquettes, crushing process, drying process, briquetting process and carbonizing process will be conducted orderly. Crushing machines are used to crush some material that are large and can not be formed by the  Cheap briquette press machine for straw directly. There are different types of crusher machines of our company. You can choose the suitable one according to the raw material that you plan to use.

The charcoal briquettes that are produced by Cheapbriquette press machine for strawfrom Chinese manufacturer are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass charcoal briquettes made by briquette press machine for straw are clean energy. After burning, there is only little ash left. This is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

Our factory is located in Anyang city, Henan province. If you want to buy Cheapbriquette press machine for straw from our company, we sincerely hope that you come and visit our factory. When you come, you can see the equipment by yourself. What’s more, we can take you to some factories that are owned by our customers who bought machines from us.

The Cheap briquette press machine for straw should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.