High-quality briquetting wooden making machine in Europe

The High-quality briquetting wooden making machine is well designed. The structure of a briquette machine is simple and reasonable. And it is easy to operate the briquette machine. What’s more, the rate of finished products of our briquette machines is pretty high. That means our machines are high-efficiency equipment.

High-quality briquetting wooden making machine in Europe are able to make use of many different biomass wastes. Apart from this source of raw material, you can also plant some “energy plants” that contains a lot of lignin on unfertile farmland. Then you can take these energy plants as raw material for briquetting.

The working principle of briquetting wooden making machine in Europe is to make powdery ligneous materials into rod-shaped solid fuel under the condition of high pressure and temperature. And the inside temperature of the machine is adjustable.

The structure of High-qualitybriquetting wooden making machine is compact. The finished briquettes can be used as fuel directly, or you can put them into a carbonation furnace for deep processing. Our machines can produce high-density briquettes which are solid fuel with high calorific value.

High-quality briquetting wooden making machine in Europe adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

This is the simple instruction of the working procedure of charcoal briquette making lines. First of all, the crushing machine will crush the raw material. Then, the drying machine will dry the wet material to some degree. Next, the dried material will be compressed and formed in the briquetting wooden making machinein Europe. The last step is to carbonize the formed briquettes with carbonation furnaces.

The charcoal briquettes that are produced by High-qualitybriquetting wooden making machinein Europe are black hollow rods whose density is three times higher than common charcoal. Its calorific value is about 7000 kcal per kilo. What’s more, ash carbon content of it is significantly lower than that of common charcoal, so it is often used in barbecues.

Biomass briquettes produced by High-quality briquetting wooden making machine don’t contain any phosphorus. Therefore, when the briquettes are burning, no sulfur dioxide  and phosphorus pentoxide will be generated. As a result, no acid rain will be formed. We can say using biomass briquettes as fuel is a way to protect the environment.

Every time you turn on the switch of a briquetting wooden making machinein Europe, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

There are something you should know about installing a briquetting wooden making machinein Europe. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.