search

Cheap husk firewood briquette making machine for EU market

2019-10-26 10:56:00
czqwjb009
Original
554
Summary :Cheap husk firewood briquette making machine are used to convert powdery material into rod-shaped products under high pressure and temperature. This equipment has some requirements for the raw material. Firstly, the diameter of the raw material should be shorter than 10mm. Secondly, the moisture content of the raw material should lower than 12%. After the forming process in the biomass briquetting machine, the formed hollow rods will be put into a carbonation furnace.

The Cheap husk firewood briquette making machine are high-efficiency and energy-saving equipment. Nowadays, people are paying more and more attention to environment protection. And biomass briquetting machines can turn some plant wastes into useful charcoal, which will protect environment indirectly. Therefore, biomass briquette machines play an important role in this field.

The main function of Cheaphusk firewood briquette making machinefor EU market is to make flammable briquettes from forestry wastes and crop wastes such as all kinds of stalks and wood dust through the technique of hot briquetting.

Cheap husk firewood briquette making machine have used the technique of piston stamping and spiral prepressing. That will make sure that the movement of the forming molds will not be damaged heavily. In other words, our briquetting equipment’s service life is longer.

Each Cheaphusk firewood briquette making machinefor EU market is equipped with an automatic electric heating appliance. To some extent, this heating appliance can adjust moisture content of the material. As a result, the forming effect of the machine is guaranteed and working efficiency of the machine has been improved.

The effect of rigid connection on the propeller bed and the machine casing is obvious. With this design, the machine can resist reaction thrust, so Cheap husk firewood briquette making machine  runs steadily  and will not make too much noise when working.

Firstly, you should use a crusher machine to crush the raw material according to the requirements. Secondly, if the water content of the crushed material is higher than 12%, a drying machine need to dry it. The moisture content of the material should be among 6%-12%. Thirdly, Cheaphusk firewood briquette making machinefor EU market will form the material into hollow rods. Finally, the hollow rods will become charcoal briquettes in the carbonation furnaces.

The charcoal briquetting rods made by Cheap husk firewood briquette making machine for EU market are used usually for outdoor barbecue. According to the characters and features of charcoal briquettes, we can also use this fuel in metallurgical industry, chemical industry, food industry, building industry, ceramic industry and stock farming.

Biomass energy has good ecological and social benefits. First of all, using biomass briquettes which are made by Cheaphusk firewood briquette making machine as fuel will protect the environment. Secondly, it will promote continuous development in agriculture.

Cheap husk firewood briquette making machine for EU market

There will be some unforeseen circumstances while using the Cheaphusk firewood briquette making machine. For example, if material clogs in the feeding port, at this time, you can use a batten or a bamboo cane to solve the problem. Notice: you mustn’t use metal bars which will damage the machine.

The Cheap husk firewood briquette making machine should go through the run-test process after installing. The first step you should do is to add some lubrication oil on the joints of the machine. Then you should check all the bolts. If any bolts are loose, you should tighten them up. Next, you should make sure there is no sundry in the machine.

Write a Comment
Comment will be posted once reviewed.