non-polluting husk wood sawdust charcoal briquette machine provided by factory - All Article - Zhengzhou E.P Machinery Co., Ltd. - Biomass Briquette Machine,Wood Pellet Machine

Summary ：In the industry of manufacturing charcoal from biomass wastes, non-polluting husk wood sawdust charcoal briquette machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine should be equipped before the biomass briquetting machine. What’s more, if the raw material is too wet, you can put a drying machine after the crusher machine.

The non-polluting husk wood sawdust charcoal briquette machine are high-efficiency and energy-saving equipment. Nowadays, people are paying more and more attention to environment protection. And biomass briquetting machines can turn some plant wastes into useful charcoal, which will protect environment indirectly. Therefore, biomass briquette machines play an important role in this field.

non-pollutinghusk wood sawdust charcoal briquette machine of EP Machinery company are high-efficiency and high-quality equipment. Our briquetting equipment can process materials including rice hull, hay, shrubs branches, wood refuse, bamboo refuse and bamboo dust, sugarcane bagasse and so on.

non-polluting husk wood sawdust charcoal briquette machine provided by factory

The husk wood sawdust charcoal briquette machine provided by factory can make briquettes from materials like shaving board, sawdust board and crop wastes which need to be crushed firstly. The most important part of the equipment is the spiral extruding axle which is the forming part of the briquetteing machine.

It is widely acknowledged in the market that non-polluting husk wood sawdust charcoal briquette machine are durable equipment. Here is the reason why our machines are long-lasting products. The main parts of the machines are made from special wear-resistant material.

non-pollutinghusk wood sawdust charcoal briquette machineprovided by factory adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according actual situation.

The main equipment of the charcoal briquette making line include four kinds of machines: crusher machines, dryer machines, husk wood sawdust charcoal briquette machine and carbonation furnaces. These machines will be used one after another. Namely, the producing process goes in this way: 1.crushing 2. drying 3. forming 4. carbonation.

The usage amount of charcoal briquettes made by non-polluting husk wood sawdust charcoal briquette machine provided by factory is on the rise gradually. Charcoal sticks are increasingly used in our daily life and industrial production. On the one hand, charcoal sticks can be used in our favorite barbecues. Because charcoal rods are smokeless and odourless, they have become more and more favorable; On the other hand, charcoal briquetting sticks are ideal material for warming in winter.

Biomass fuel is an important renewable energy resource. Nowadays, under the situation that fossil fuel becomes less and less, biomass energy aroused people’s wide concern. Charcoal briquettes made by non-polluting husk wood sawdust charcoal briquette machine are the most common biomass fuel whose ash content and sulphur content is relatively low. That means it will not cause many pollutants to use charcoal as fuel.

There is a regulation for using a non-polluting husk wood sawdust charcoal briquette machine. Before stopping the machine, the feeding port should be empty, which means all material in the feeding port has been processed. Besides, we suggest you install a ampere-voltage meter to avoid overload operation.

There are something you should know about installing a husk wood sawdust charcoal briquette machine provided by factory. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.