search

Durable piston briquette machine

2019-10-28 02:56:00
czqwjb009
Original
570
Summary :E.P biomass briquetting machines are made of special wear-resistant material. Thus, compared with traditional equipment, the refined briquette machines have long service life. In addition, durable piston briquette machine are labor-saving equipment.

In the industry of manufacturing charcoal from biomass wastes, durable piston briquette machine and carbonizing furnaces are very important equipment. In other words, they are core machines in a charcoal briquette production line. If the raw material is relatively large pieces or granules, a crushing machine is necessary to be equipped in the production line. What’s more, if the raw material is too wet, you need to use a drying machine to dry the crushed material.

Our biomass briquetting equipment employs corn stalks, corncob, twigs, leaves and saw dust as raw materials. Firstly, you need to use an EP crusher machine to make those materials into small particles or powder. Then the crushed material will be compressed in the durablepiston briquette machinewith small investment.

The working principle of durable piston briquette machine with small investment is quite simple. The crushed materials(twigs, stalks, straws, cotton stalks...) will be added into the feeding port. There is no need to add any adhesive in the powdery materials. Under high temperature and pressure, the materials will be pressed into high-density briquettes.

The core part of the durable piston briquette machine is the screw propeller, which is made of ultratek and tungsten carbide. Hence, its service life is longer. What’s more, it can operate continuously for 40 to 60 hours. If you maintain it at regular intervals, you can use it for a long time.

Durable piston briquette machines adopt v-belt drive which can make the machine work smoothly. In addition, v-belt drive can also act as overload protection device. Moreover, there are two connection modes of the machine head and the cylinder body: insert connection and bolted connection. And you can choose the best connection mode according to actual situation.

In general, to make charcoal briquettes, crushing process, drying process, briquetting process and carbonizing process will be conducted orderly. Crushing machines are used to crush some material that are large and can not be formed by the  durable piston briquette machine directly. There are different types of crusher machines of our company. You can choose the suitable one according to the raw material that you plan to use.

In industrial engineering, charcoal briquettes that are made by durable piston briquette machine with small investment can take place of coal and heavy oil to be fuel for heating steam boilers. In addition, the charcoal briquette can also be used to make activated carbon, silicon carbide and so on. Therefore, charcoal briquettes are necessary material in mosquito-repellent incense plants, explosive factories and casting factories.

durable piston briquette machine with small investment

Biomass charcoal briquettes made by piston briquette machine are clean energy. After burning, there is only little ash left, which is good for environment protection. What’s more, little ash is left means you don’t need a large place to store the ash. And the ash can be used as fertilizer.

When you turn on the switch of a piston briquette machine, you should check the flexibility of machines’ rotating parts and make sure there is no abnormal noise. What’s more, before add material into the feeding port, the machine should idle for 2-3 minutes.

There are something you should know about installing a piston briquette machine with small investment. Firstly, before installing, all the components of the machine should be cleaned. Secondly, make sure there is no broken parts in the machine. Thirdly, the machine should be fixed on the ground firmly.

Write a Comment
Comment will be posted once reviewed.